Vacuum casting polyurethane resin for technical parts and prototypes.
Used by casting in silicone moulds for the realisation of prototype parts and mock-ups whose mechanical properties are close to those of thermoplastics.
NOTE: After demoulding it is not necessary to use a conformer to maintain the part in the oven during the post curing. Nevertheless it is advisable to ensure that the geometry or the mass of the part does not present any deformation risk.
Normal health and safety precautions should be observed when handling these products :
Shelf life of Polyol and Isocyanate is 12 months in a dry place and in their original unopened containers at a temperature between 15 and 25°C. Any open can must be tightly closed under dry nitrogen blanket.
Polypropylene-Like Urethane – 70D
High Temp Rigid Urethane – PX 223/HT
Silicone Rubber Durometer 40A – TC-5040
Silicone Rubber Durometer 45A – TC-5041
Silicone Rubber Durometer 60A -TC-5060
Rigid General Purpose Urethane Plastic – TC-850
Rigid Clear Urethane Plastic – TC-879
Rigid Flame Retardant Urethane Plastic – TC-894