Process Materials
An Excessive Array of Media to Get the Job Done
An Excessive Array of Media to Get the Job Done
GoProto only wishes you success with your projects, so we’ve come up with prototype resources that will allow us to explain a little more about what our processes entail.
Below you will find information regarding the prototyping materials we use for each manufacturing process. All of these options are available to you. We have also included a technical manual giving more details regarding HP Multi Jet Fusion procedures.
On each process page, we’ve also included the prototyping materials we can use, so be sure to check back there.
We hope our prototype resources are helpful to you and can give you an understanding of our work. We appreciate any questions or concerns you might have, and we look forward to working with you!
PA12 || (Properties) – Thermoplastic Materials Document 
Glass Bead Filled – PA12 || (Properties) – Thermoplastic Materials Document
PA12 || Technical Guideline for Material Development
ABS || BLACK, DK GREY, WHITE
ASA || BLACK, NATURAL, RED, BLUE
NYLON CARBON-3ntr || BLACK
PCABS-3ntr || NATURAL, BLACK
PCABS-DOMESTIC || CLR, RED, GRN, BLU, BLK, WHT
GPETG (HP1/FDA2)-DOMESTIC || FDA2
TPETG (HP1 PETG)-DOMESTIC || CLEAR, HIGH LIGHT TRANS
TPU RUBBER-SHORE 95A || BLACK, CLEAR
TPU RUBBER-SHORE 85A || BLACK, CLEAR
PLA-DOMES (TPU SUPPORT) || (Properties) – BLACK, CLEAR
PC (POLYCARBONATE ||
PPS 3ntr nPOWER ||
ACCUR || NATURAL (OFF WHITE)
ACCURA XTREME WHITE || WHITE
ACCURA XTREME GREY || GREY
ACCURA BLUESTONE || BLUE
ACCURA CLEARVUE || CLEAR
SOMOS 11122 || CLEAR
SOMOS 18420 || WHITE
NEXT || WHITE
PERFORM || OFF-WHITE
ALUMINUM || ALSI10MG, ALSI12
TITANIUM || TI64, TICP
INCONEL || 718, 625 COBALT CHROME
MONEL K500
MARAGING STEEL
NICKEL ALLOW HX
HANES 282
STAINLESS STEEL
NYLON 12 || NATURAL
GLASS-FILLED NYLON || NATURAL
FLAME-RETARDANT NYLON || NATURAL
CARBON-FILLED NYLON || BLACK
ALUMINUM-FILLED NYLON || GREY
PEEK HIGH TEMP || BLACK
FULLCURE 720 || CLEAR AMBER
CLEAR FULLCURE 630 || CLEAR, NEW MATERIAL
FULLCURE 835 VeroWhitePlus || WHITE-MASTER MODEL CHOICE MATERIAL
RGD875, VeroBlackPlus || BLACK
FULLCURE 850 VeroGrey || GREY
PP-Like Urethane – 70D ||
PX 223/HT ||
Silicone Durometer 40A – TC-5040 ||
Silicone Durometer 45A – TC-5041 ||
Silicone Durometer 60A -TC-5060 ||
TC-850 ||
TC-879 ||
TC-894 ||
POLYCARBONATE || BLACK OR CLEAR
ABS || NATURAL (OFF-WHITE) OR BLACK
ABS – v0 FLAME-RATED || BLACK
PC+ABS || BLACK
ACRYLIC || CLEAR
ULTEM || TRANSLUCENT AMBER, BLACK
NYLON || NATURAL (OFF-WHITE) OR BLACK
POLYPROPYLENE || BLACK
NAK80 ||
SKD11 ||
Copper Alloy Guide ||
AL6061-T6 ||
ABS ||
PC ||
ACRYLIC ||
PC+ABS
TPO
ELASTOMER/RUBBER ||
GLASS-FILLED PC, ABS, NYLON
NYLON ||
ULTEM 1000 ||
ULTEM 2300 ||
ALUMINUM TOOLING
DME STEEL TOOLING
P-20 STEEL TOOLING
NAK 80 STEEL TOOLING
H-13 AND S-7 STEEL TOOLING
PRE-PLATED COLD-ROLLED STEEL
COLD-ROLLED STEEL
ALUMINUM
STAINLESS STEEL
BERYLLIUM COPPER
COLOR || PANTONE BOOK COATED
TEXTURE || MoldTech 11000 SERIES
SILKSCREEN || DEPENDING ON PART GEOMOTRY
RUB-ONS || When silkscreen not possible / detail too small (W/CLEAR COAT)
CLEAR COAT || Polish for extra high gloss parts
GoProto only wishes you success with your projects, so we’ve come up with prototype resources that will allow us to explain a little more about what our processes entail.
Below you will find information regarding the prototyping materials we use for each manufacturing process. All of these options are available to you. We have also included a technical manual giving more details regarding HP Multi Jet Fusion procedures.
On each process page, we’ve also included the prototyping materials we can use, so be sure to check back there.
We hope our prototype resources are helpful to you and can give you an understanding of our work. We appreciate any questions or concerns you might have, and we look forward to working with you!
PA12 || (Properties) – High strength general purpose Nylon 12 material
Get More Info
Glass Bead Filled PA12 || (Properties) – High strength general purpose Nylon 12 material
Get More Info
PA11 || (Properties) – High strength and high flexibility general purpose Nylon 11 material made from castor bean oil
Get More Info
NEW! TPA (Thermoplastic Amide, Elastomer) || (Properties) – Softer durometer, high durability, springy and flexible elastomer material
Get More Info
TPU (Thermoplastic Polyurethane, Elastomer) || (Properties) – Specially optimized elastomer for HP’s Multi Jet Fusion (MJF) technology
Get More Info
Vapor Smoothing || PostPro3D® BLAST is a physical-chemical-based process that can smooth a wide variety of thermoplastic polymers that are printed in MJF, SLS or FDM 3D printing technologies.
Get More Info
Cerakote || Protective ceramic-based thin film coating providing UV resistance, Heat resistance and chemical resistance to MJF parts.
Get More Info
Hydrographics || A method we use to apply printed designs onto parts printed with Multi Jet Fusion
Get More Info
Metalization || Cosmetic and functional metal plating for parts printed with Multi Jet Fusion
Get More Info
Dyeing, Painting, Clear-Coat || A method we use to apply printed designs onto parts printed with Multi Jet Fusion
Get More Info
ABS-M30 || General purpose material with good mechanical properties and low cost
Get More Info
ASA || General purpose material similar to ABS but with improved UV stability
Get More Info
NYLON 12 – Chopped Carbon-Filled || Super stiff and strong
Get More Info
PC (Polycarbonate) || General purpose production material that is stronger than ABS or ASA
Get More Info
PC/ABS || General purpose production material that combines strength of PC with flexibility of ABS
Get More Info
PETG || Food grade, strong and great for general purpose. UV stable.
Get More Info
TPU Elastomer – Shore 95A || Flexible elastomer ideal for prototypes of soft parts
Get More Info
ULTEM 1010 || High temp and high strength ideal for medical, aerospace, food contact
Get More Info
ULTEM 9085 || Certified for Aerospace. Flame retardant and low smoke & toxicity high temp and high strength.
Get More Info
Orienting for Strength, Speed or Surface Finish || Get Best Practices Guide
Designing for Production Parts || Get Best Practices Guide
ACCURA 25 || NATURAL (OFF WHITE) Get More Info
ACCURA XTREME WHITE 200 || WHITE Get More Info
Accura 60 Clear (Black) || CLEAR Get More Info
SOMOS 11122 || CLEAR Get More Info
NEXT (White) || WHITE Get More Info
ALUMINUM || ALSI10MG, ALSI12 Get More Info
TITANIUM || TI64, TICP Get More Info
MARAGING STEEL Get More Info
STAINLESS STEEL Get More Info
Polypropylene-Like Urethane – 70D || Get More Info
High Temp Rigid Urethane – PX 223/HT || Get More Info
Silicone Rubber Durometer 40A – TC-5040 || Get More Info
Silicone Rubber Durometer 45A – TC-5041 || Get More Info
Silicone Rubber Durometer 60A -TC-5060 || Get More Info
Rigid General Purpose Urethane Plastic – TC-850 || Get More Info
Rigid Clear Urethane Plastic – TC-879 || Get More Info
Rigid Flame Retardant Urethane Plastic – TC-894 || Get More Info
POLYCARBONATE || Black or Clear
ABS || Natural (Off-White) or Black
ABS – v0 FLAME-RATED || Black
PC+ABS || Black
ACRYLIC || Clear
ULTEM || Translucent Amber or Black
NYLON || Natural (Off-White) or Black
POLYPROPYLENE || Black
NAK80 || Get More Info
SKD11 Steel || Get More Info
Copper Alloy Guide || Get Guide
Aluminum AL6061-T6 || Get More Info
ABS ||
PC ||
ACRYLIC ||
PC+ABS
TPO
ELASTOMER/RUBBER ||
GLASS-FILLED PC, ABS, NYLON
NYLON ||
ULTEM 1000 ||
ULTEM 2300 ||
ALUMINUM TOOLING
DME STEEL TOOLING
P-20 STEEL TOOLING
NAK 80 STEEL TOOLING
H-13 AND S-7 STEEL TOOLING
PRE-PLATED COLD-ROLLED STEEL
COLD-ROLLED STEEL
ALUMINUM
STAINLESS STEEL
BERYLLIUM COPPER
COLOR || Matched to Pantone or RAL or provided color chips
TEXTURE || MoldTech, Tenibac, Custom matches
SILKSCREEN || Depending on part geometry
RUB-ONS || When silkscreen not possible / detail too small (W/CLEAR COAT)
CLEAR COAT || Polish for extra high gloss parts
VAPOR SMOOTHING NEW! || PostPro3D® BLAST Learn More ➞
CERAKOTE || Durable ceramic paint for MJF and metal parts
HYDROGRAPHICS || Hydrographic artwork applied to parts
“Hey Guys, Hope all is well! I just received the sheet metal parts and assembled them onto the prototype it belongs to and it’s perfect! Just wanted to let you know you guys did a great job!” — Daren (design engineering company)View testimonials
Quick Turn Injection Tooling Which one is right for you? We do them all. Let us help. Plastic injection molding […]
Read case study
March 3rd, 2021 – San Diego digital manufacturing company GoProto has been busy acquiring businesses and increasing its 3D printing […]
Read blog post